KwikSert Threaded Inserts
< Back to products

KwikSert Threaded Inserts

KwikSert Threaded Inserts

The newest range of products to Fitsco are KwikSert threaded inserts. KwikSert threaded inserts are available in both brass and steel, and would ideally suit plastic and metal applications. The threaded inserts are installed quickly due to their simple hexagon drive and self-tapping action. No specialist tooling is required to install these threaded inserts and they have a reliable internal thread. The threaded inserts should be inserted using a hexagon driver and screwed into a pre-drilled hole

Downloads

AB +0.00 -0.15C ±0.2D ±0.25 STEEL ONLYE WRENCH KEY SIZERECOMMENDED HOLE SIZE FOR PLASTICRECOMMENDED HOLE SIZE FOR METALF (MIN)G (MIN)
M3 x 0.55.006.35-2.504.404.607.805.00
M4 x 0.77.009.657.20"(.125"")"6.256.5011.107.00
M5 x 0.89.0011.188.404.008.258.5012.609.00
M6 x 1.010.0012.7010.005.009.259.5014.2010.00
M8 x 1.2512.0014.2210.80"(.250"")"11.1011.3515.7012.00
M10 x 1.514.0015.7512.408.0013.1013.3517.2014.00

Further Information About This Product

KwikSert-threaded-inserts-2

Product advantages of these Fitsco threaded inserts:

  • Quick installation
  • A simple hexagonal drive
  • Self-tapping action
  • Reliable internal thread of the threaded inserts
  • No specialist tooling is required to install these threaded inserts

Applications:

  • Hole Preparation: a pre-drilled hole is recommended
  • Installation: use a standard hexagon driver
  • Wall thickness: An appropriate guide is shown on the data sheet below

© Fitsco Industries Ltd.
Website by Remote