Headed
< Back to products

MultiFit Inserts

Headed

Fitsco Industries offers the 'Multifit' unheaded range of brass threaded inserts to suit all types of thermoplastic injection mouldings, the main advantage of this product range is that it is easy to install either 'hot' or 'cold'.

Equivalent to:

Tappex 003 ; 004 ; 005 ; 006 ; 071 ; 072

Note: For comparison purposes only

Downloads

PRODUCT CODELENGTHTHREADAHReduced H1XT HEAD THICKNESS2XT HEAD THICKNESSDREC. HOLE SIZE
F3/H-BShortM22.1-4.80.5-3.53.3
F3/H-BRegularM24.2-4.80.5-3.53.3
F3/H-BShortM2.54.17.15.50.75-4.34
F3/H-BRegularM2.55.27.15.50.75-4.34
F3/H-BShortM34.17.15.50.751.54.34
F3/H-BRegularM35.27.15.50.751.54.34
F3/H-BShortM3.54.17.96.40.751.255.55
F3/H-BRegularM3.577.96.40.751.255.55
F3/H-BShortM45.68.77.10.751.56.35.75
F3/H-BRegularM48.58.77.111.56.35.9
F3/H-BShortM56.611.17.911.757.056.4
F3/H-BRegularM510.111.17.911.757.056.5
F3/H-BShortM67.712.79.51.328.658
F3/H-BRegularM612.312.79.51.2528.658.2
F3/H-BShortM810.114.312.71.252.511.0510.5
F3/H-BRegularM813.814.3-1.252.511.0510.6
F3/H-BShortM1010.1-14.31.252.512.512.9

Further Information About This Product

Product Advantages of this threaded insert:

  • The insert is easy to install
  • Versatile - can be installed 'hot' or 'cold' into a wide range of materials, including wood, plastic and metal
  • High performance
  • Different designs to suit varied applications
  • Headed versions can be used in hard woods providing a hole is pre-drilled

Applications:

  • Hole Preparation: Moulded holes are recommended
  • Installation: The threaded insert is installed by either pressing in cold, using heat staking or ultrasonics
  • Wall Thickness: An appropriate guide is that the wall thickness should not be less than half the hole diameter

You may also be interested in

© Fitsco Industries Ltd.
Website by Remote