F2 - Headed Version
< Back to products

PressFit Inserts

F2 - Headed Version

The 'Pressfit' range of threaded inserts suits applications where the inserts are pressed-in cold. Different designs cater for all types of applications and materials.

P/NOPRODUCT CODETHREADABCDREC. HOLE SIZEMIN. WALL THICKNESS
002354F2/H-BM24.13.44.80.553.11.6
000842F2/H-BM2.55.34.25.60.553.82
000626F2/H-BM35.34.25.60.553.82
000150F2/H-BM3.56.356.40.74.62.5
000066F2/H-BM47.45.87.20.85.42.5
000843F2/H-BM58.36.6816.22.5
000003F2/H-BM69.28.29.51.37.82.8
001001F2/H-BM89.29.7111.39.33.8
001673F2/H-BM109.212.7141.612.35

Further Information About This Product

Product Advantages

  • Easy to install
  • No expensive equipment required
  • High torque performance

Applications

  • Hole Preparation: Moulded holes are recommended. The hole diameter is measured at the point where the bottom of the insert meets the moulded hole.
  • Installation: The insert must be installed using a slow squeezing action. The insert must be allowed to rotate as it is installed.
  • Wall Thickness: The wall thickness is critical to prevent cracking, and should be no less than 1/2 the specified hole diameter.
© Fitsco Industries Ltd.
Website by Remote New Media