Unheaded
< Back to products

MultiFit Inserts

Unheaded

Fitsco Industries offers the 'Multifit' unheaded range of brass threaded inserts to suit all types of thermoplastic mouldings, the main advantage of this product range is that it is easy to install either 'hot' or 'cold'.

Equivalent to:

Tappex Multisert 001 & 002

Note: For comparison purposes only

Downloads

P/NOPRODUCT CODELENGTHTHREADABREC. HOLE SIZE
002008F3/BRegularM24.23.53.30
001330F3/BShortM2.54.14.34.00
001329F3/BRegularM2.55.24.34.00
001328F3/BShortM34.14.34.00
001303F3/BRegularM35.24.34.00
002262F3/BShortM3.54.15.55.00
000828F3/BRegularM3.57.05.55.00
001487F3/BShortM45.66.35.75
001481F3/BRegularM48.56.35.90
001762F3/BShortM56.67.056.40
001457F3/BRegularM510.17.056.50
001739F3/BShortM67.18.658.00
001731F3/BRegularM612.38.658.20
001892F3/BShortM88.311.0510.50
001893F3/BRegularM813.811.0510.60
001713F3/BShortM1010.112.512.90
001720F3/BRegularM1016.112.513.00

Further Information About This Product

Product Advantages:

  • Easy to install
  • Versatile - can be installed 'hot' or 'cold' into a wide range of materials.
  • High performance
  • Different designs to suit varied applications

Applications:

  • Hole Preparation: Moulded holes are recommended
  • Installation: The insert is installed by either pressing in cold, using heat staking or ultrasonics.
  • Wall Thickness: An appropriate guide is that the wall thickness should not be less than 1/2 the hole diameter.

You may also be interested in

© Fitsco Industries Ltd.
Website by Remote New Media